SMPS Battery Charger

Item Code: BC-60W

Rechargeable batteries require battery charger to bring them back to full power, the charger will provide electricity to the electrodes (opposite to the direction of electron discharge,) which will reverse the chemical process within the battery, converting the applied electrical energy into chemical potential energy. We manufacture SMPS battery charger constant current and  nstant voltage with  PWM conversion techniques; it is suitable for all types and capacities of battery. Our several range of product is as follows:

FEATURES

• CHARGER APPLICATION USED FOR ALL TYPES OF RECHARGABLE BATTERIES.

• (This charger is applicable for 6V/80AH, 12V/42AH, 24V/26AH, 36V/16AH & 48V/10AH capacity battery.)

• Proven Technology CVCC-PWM Control ,

• Latest mosfet technology for switching.

• Very Compact Size/ Light Weight ,Wild Input Range

• highly efficient /Cost effective / Easy to connect.

• Guaranteed input to output isolation.

• CVCC Characteristic for Battery Charging application.

• Internally program or adjustable output voltage and current as per requirement.

• Inbuilt battery blocking diode provided.

• All double rated component used in product for reliability and long life.

SPECIAL FEATURES:

• Soft start on DC side.

• Class-F insulation for all magnetic.

• Automatic voltage regulation using digital control logic.

• Filter circuit to limit ripple

TECHNICAL DATASHEET (Specification)

INPUT

• AC Input range : 150V AC TO 300V AC (single phase)Our wide range for 230V AC input.

• Frequency : 47 to 63 HZ

• Input Protection : Internal AC Fuse + Soft Start.

• EMI Compliance : Inbuilt RFI/EMI Filter Provided

• Hold up Time : 20 m Sec @ Minimum AC input.

• Fuse : Glass fuse 3A, 250V AC.

OUTPUT

• Voltage :Internally program ,adjustable as required or according to your battery require( 60V Max)

• Current : Constant current Internally program or adjustable ( 8A max).

• O/P power : 60W. Max.

• Regulation : ± 0.5% Line and Load.

• Output ripple and noise : Less than 1% PK-PK.

• Protection : O/P over voltage, over load & short circuit.

• Indication : LED for charger ON.

• Hold up time :20 m Sec @ Minimum input.

• Isolation :Between input & output up-to 3KV.

• Working Temperature :(-)15C to (+)85 + ambient temperature.

• Efficiency : Better than 85%.

• Quality & Safety : to suit IEC 950 ,UL 1950

• Enclosure :MS powder coated enclosure.

• Cooling :Natural heat sink for cooling.

• Note : All specifications are subject to change without notice

TECHNICAL SPECIFICATIONS

MECHANICAL

• L x D x H (mm) : 90 x 130x 60mm (Enclosure dimension.)

• Note: Send your enquiry with battery type, Battery voltage, and battery AH capacity. We will suggest charger voltage and current, to charge battery at peak level with safe condition within target time.

• Attractive price for bulk order

Item Code: BC-150W

We have with us a range of cvcc battery chargers with 60w to 150w smps base, that are manufactured using advanced technology. Precision engineered, these are compact in size, light in weight and known for their high efficiency. Further, we are also capable to provide these chargers in customized specifications to clients.

Features

• charger application used for all types of rechargable batteries

• (this charger is applicable for 6v/200ah, 12v/100ah, 24v/60ah, 36v/35ah , 48v/26ah & 72v/18ah capacity battery. )

• proven technology cvcc-pwm control ,

• latest mosfet technology for switching.

• very compact size/ light weight , wild input range

• highly efficient /cost effective / easy to connect.

• guaranteed input to output isolation.

• cvcc characteristic for battery charging application.

• internally program or adjustable output voltage and current as per battery requirement.

• inbuilt battery blocking diode provided.

• all double rated component used in product for reliability and long life.

special features:

• soft start on dc side.

• class-f insulation for all magnetic.

• automatic voltage regulation using digital control logic.

• filter circuit to limit ripple

technical datasheet (specification)

input

• ac input range : 150v ac to 300v ac (single phase)our wide range for 230v ac input.

• frequency : 47 to 63 hz

• input protection : internal ac fuse + soft start.

• emi compliance : inbuilt rfi/emi filter provided

• hold up time : 20 m sec minimum ac input.

• fuse : glass fuse 6a, 250v ac.

output

• voltage :internally program , adjustable as required or according to your battery require(87v max)

• current : constant current internally program or adjustable ( 20a max).

• o/p power : 150w. Max.

• regulation : ± 0. 5% line and load.

• output ripple and noise : less than 1% pk-pk.

• protection : o/p over voltage, over load & short circuit.

• indication : led for charger on.

• hold up time :20 m sec  minimum input.

• isolation :between input & output up-to 3kv.

• working temperature :(-)15c to (+)85 + ambient temperature.

• efficiency : better than 85%.

• quality & safety : to suit iec 950 ,ul 1950

• enclosure : ms powder coated enclosure with enclosure wall mounting facility

• cooling :natural heat sink for cooling.

• note : all specifications are subject to change without notice

technical specifications

mechanical

• l x d x h (mm) : 105 x 205 x 70mm (enclosure dimension. )

note: send your enquiry with battery type, battery voltage, and battery ah capacity. We will suggest charger voltage and current, to charge battery at peak level with safe condition within target time.

• attractive price for bulk order

Item Code: BC-250W

We bring to our clients a range of 150w to 250w smps base cvcc battery chargers, that are designed in compliance with the set industrial standards. Compact in size, our range of chargers are appreciated for their optimum performance and long functional life. These are also available in customized specifications and at most competitive prices.

 

 

Features

• charger application used for all types of rechargable batteries

• (this charger is applicable for 6v/350ah, 12v/180ah, 24v/80ah, 36v/60ah 48v/45ah & 72v/30ah capacity battery. )

• proven technology cvcc-pwm control ,

• latest mosfet technology for switching.

• very compact size/ light weight , wild input range

• highly efficient /cost effective / easy to connect.

• guaranteed input to output isolation.

• cvcc characteristic for battery charging application.

• internally program or adjustable output voltage and current as per battery requirement.

• inbuilt battery blocking diode provided.

• all double rated component used in product for reliability and long life.

special features:

• soft start on dc side.

• class-f insulation for all magnetic.

• automatic voltage regulation using digital control logic.

• filter circuit to limit ripple

technical datasheet (specification)

input

• ac input range : 150v ac to 300v ac (single phase)our wide range for 230v ac input.

• frequency : 47 to 63 hz

• input protection : internal ac fuse + soft start.

• emi compliance : inbuilt rfi/emi filter provided

• hold up time : 20 m sec  minimum ac input.

• fuse : glass fuse 10a, 250v ac.

output

• voltage :internally program , adjustable as required or according to your battery require(87v max)

• current : constant current internally program or adjustable ( 35a max).

• o/p power : 250w. Max.

• regulation : ± 0. 5% line and load.

• output ripple and noise : less than 1% pk-pk.

• protection : o/p over voltage, over load & short circuit.

• indication : led for charger on.

• hold up time :20 m sec @ minimum input.

• isolation :between input & output up-to 3kv.

• working temperature :(-)15c to (+)85 + ambient temperature.

• efficiency : better than 85%.

• quality & safety : to suit iec 950 ,ul 1950

• enclosure : ms powder coated enclosure with enclosure wall mounting facility

• cooling : natural heat sink + fan provided for cooling

• note : all specifications are subject to change without notice

technical specifications

mechanical

• l x d x h (mm) : 125 x 200 x 95mm (enclosure dimension. )

• note: send your enquiry with battery type, battery voltage, and battery ah capacity. We will suggest charger voltage and current, to charge battery at peak level with safe condition within target time.

• attractive price for bulk order

 

Item Code: BC-600W

We are specialized in manufacturing cvcc battery chargers with 250w to 600w smps.

 

Features

• charger application used for all types of rechargable batteries

• (this charger is applicable for 6v/800ah, 12v/400ah, 24v/200ah, 36v/140ah ,48v/100ah , 72v/65ah & 108v/45ah capacity battery. )

• proven technology cvcc-pwm control ,

• latest mosfet technology for switching.

• very compact size/ light weight , wild input range

• highly efficient /cost effective / easy to connect.

• guaranteed input to output isolation.

• cvcc characteristic for battery charging application.

• internally program ,external control or adjustable output voltage and current as per requirement.

• output voltage adjustment is available from 0 to max.

• output current adjustment is available from 10% to max.

• inbuilt battery blocking diode provided.

• inbuilt battery reverse polarity protection provided.

• rocker switch with on indication for input on/off.

• all double rated component used in product for reliability and long life.

special features:

• soft start on dc side.

• class-f insulation for all magnetic.

• automatic voltage regulation using digital control logic.

• filter circuit to limit ripple

technical datasheet (specification)

input

• ac input range : 150v ac to 300v ac (single phase)our wide range for 230v ac input.

• frequency : 47 to 63 hz

• input protection : internal ac fuse + soft start.

• emi compliance : inbuilt rfi/emi filter provided

• hold up time : 20 m sec @ minimum ac input.

• fuse : glass fuse 20a, 250v ac.

output

• voltage : internally program ,adjustable ,external control as required or according to your battery requirement(0v to 130v max).

• current : constant current- internally program ,adjustable ,external control as required or according to your battery requirement. ( 5a to 80a max).

• o/p power : 600w. Max.

• regulation : ± 0. 5% line and load.

• output ripple and noise : less than 1% pk-pk.

• protection : o/p over voltage, over load & short circuit, battery reverse polarity.

• indication : two nos. High quality digital panel meter to display output voltage and current .

• hold up time :20 m sec minimum input.

• isolation :between input & output up-to 3kv.

• working temperature :(-)15c to (+)85 + ambient temperature.

• efficiency : better than 85%.

• quality & safety : to suit iec 950 ,ul 1950

• enclosure : ms powder coated 2u height enclosure with enclosure table top and rack mounting facility.

• cooling : natural heat sink + fan provided for cooling

Item Code: BC-1200W

We offer smps battery charger (600w to 1200w)

features

• charger application used for all types of rechargable batteries

• (this charger is applicable for 6v/1600ah, 12v/800ah, 24v/400ah, 36v/280ah ,48v/200ah & 72v/140ah, 108v/100ah, 216v/45ah capacity battery. )

• proven technology cvcc-pwm control ,

• latest mosfet technology for switching.

• very compact size/ light weight , wild input range

• highly efficient /cost effective / easy to connect.

• guaranteed input to output isolation.

• cvcc characteristic for battery charging application.

• internally program ,external control or adjustable output voltage and current as per requirement.

• output voltage adjustment is available from 0 to max.

• output current adjustment is available from 10% to max.

• inbuilt battery blocking diode provided.

• inbuilt battery reverse polarity protection provided.

• mcb for input protection and on/off purpose. .

• all double rated component used in product for reliability and long life.

special features:

• soft start on dc side.

• class-f insulation for all magnetic.

• automatic voltage regulation using digital control logic.

• filter circuit to limit ripple

• programmable output voltage & current can be programmed by external control voltage (0-5v or 0v -10v ref. ).

technical datasheet (specification)

input

• ac input range : 150v ac to 300v ac (single phase)our wide range for 230v ac input.

• frequency : 47 to 63 hz

• input protection : internal ac fuse + soft start.

• emi compliance : inbuilt rfi/emi filter provided

• hold up time : 20 m sec @ minimum ac input.

• fuse : glass fuse 20a, 250v ac.

• protection ; mcb protection and on/off

output

• voltage : internally program ,adjustable ,external control as required or according to your battery requirement(0v to 260v max).

• current : constant current- internally program ,adjustable ,external control as required or according to your battery requirement. ( 10a to160a max).

• o/p power : 1200w. Max.

• regulation : ± 0. 5% line and load.

• output ripple and noise : less than 1% pk-pk.

• protection : o/p over voltage, over load & short circuit, battery reverse polarity.

• indication : two nos. High quality digital panel meter to display output voltage and current .

• hold up time :20 m sec @ minimum input.

• isolation :between input & output up-to 3kv.

• working temperature :(-)15c to (+)85 + ambient temperature.

• efficiency : better than 85%.

• quality & safety : to suit iec 950 ,ul 1950

• enclosure : ms powder coated 3u height enclosure with enclosure table top and rack mounting facility.

Item Code: BC-2400W

We offer industrial smps battery charger (1200w to 2400w)
features

• charger application used for all types of high current rechargable batteries

• (this charger is applicable for 6v/3300ah, 12v/1600ah, 24v/850ah, 36v/550ah ,48v/400ah & 72v/280ah, 108v/180ah, 216v/90ah , 432v/46ah capacity battery. )

• proven technology cvcc-pwm control ,

• latest mosfet technology for switching.

• very compact size/ light weight , wild input range

• highly efficient /cost effective / easy to connect.

• guaranteed input to output isolation.

• cvcc characteristic for battery charging application.

• internally program ,external control or adjustable output voltage and current as per requirement.

• output voltage adjustment is available from 0 to max.

• output current adjustment is available from 10% to max.

• inbuilt battery blocking diode provided.

• inbuilt battery reverse polarity protection provided.

• mcb for input protection and on/off purpose.

• master slave operation with equal voltage and current sharing.

• high power charger system configuration with stack able multiple unit.

• no possibility of unit to shut down as we have used multiple units to support total output.

• all double rated component used in product for reliability and long life.

special features:

• soft start on dc side.

• class-f insulation for all magnetic.

• automatic voltage regulation using digital control logic.

• filter circuit to limit ripple

• programmable output voltage & current can be programmed by external control voltage (0-5v or 0v -10v ref. ).

technical datasheet (specification)

input

• ac input range : 150v ac to 300v ac (single phase)our wide range for 230v ac input.

• frequency : 47 to 63 hz

• input protection : internal ac fuse + soft start.

• emi compliance : inbuilt rfi/emi filter provided

• hold up time : 20 m sec @ minimum ac input.

• fuse : glass fuse 20a, 250v ac.

• protection ; mcb protection and on/off

output

• voltage : internally program ,adjustable ,external control as required or according to your battery requirement(0v to 520v max).

• current : constant current internally program or adjustable ( 330a max).

• o/p power : 2400w. Max.

• regulation : ± 0. 5% line and load.

• output ripple and noise : less than 1% pk-pk.

• protection : o/p over voltage, over load & short circuit.

• indication : two nos. High quality digital panel meter to display output voltage and current .

• hold up time :20 m sec @ minimum input.

• isolation :between input & output up-to 3kv.

• working temperature :(-)15c to (+)85 + ambient temperature.