We are engaged in offering power sypply system with 1100W & 1600W SMPS base. Our range of power sypply system with 1100W & 1600W SMPS base are available with following specification:

Model No.:- MPE801

Featuers

• According to your Specification & Requirement Up-to 1600W.
• Proven Technology half Bridge ,Push Pull, Fly-back, PWM Control.
• Very Compact Size/ Light Weight.
• Wide Input Range / highly efficient.
• Output over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment 0 to Max. Available.
• CVCC/ FCBC Characteristic for High Current Battery Charging Application.
• Specific type of enclosures & Meter.
• Programmable SMPS output Voltage can be programmed by external control voltage (0-5V or 0V to 10V Ref.)*.
  
• TTL Switch.*
• Direct series connection.
• By Using External Diode Block (N+1) Redundancy Possible.

Technical Specification

• L x D x H (mm) : 380 x 340 x 280 (Box for 1100W).
  : Unit Weight : 17.00 Kg.
  : 380 x 340 x 420 (Box for 1600W).
  : Unit Weight : 26.00 Kg.

Input

• Input Voltage : 9V-18V or 18V-36V or 36V- 63V or 63V-90V or 90V- 135V DC or 90V AC To 135V AC or 150V AC TO 300V AC(Single Phase)
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 60A @ 240V Fuse AC 1/2 Cycle.
• Hold Up Time : 20 m Sec @ Minimum Voltage input
• Efficiency : 75-85%.

Output

• Voltage: As required 0 TO 260V Max. (Adj.) or Fixed. (For 1100W) or Two number output (550W.) each
• Voltage: As required 0 TO 390V Max. (Adj.) or Fixed. (For 1600W) or Three number output (550W.) each
• Current: 0.5A TO 100A (Max.) Fixed or Adj.
• Regulation : ± 0.5% Line and Load.
• Ripple : 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : 2 Nos. Digital Panel Meter for O/P Voltage & Current Measurement.

Termination

• Screw Type or Nut-Bolt (For High Current).

Cooling

• In Box Fan Cooling Provided.

Isolation

• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KVAC for one minute.

Warranty

• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.

We are engaged in offering power sypply system with 250 SMPS base forward reverse DC motor driver. Our range of power sypply system with 250 SMPS base forward reverse DC motor driver are available with following specification:

Model no.:- MPE802

Featuers

• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
• Wide Input Range / Highly efficient.
• Output over Load, Over Voltage & Short circuit Protection.
• Programmable output current limit.
• CVCC Characteristic DC Motor Application.
• Open PCB With Screw mounting Facility
  
• Voltage Adjustment 0 to Max. Available.
• You Can Change Output Voltage Polarity By Signal/Switch.
• Drive direction Forward-reverse change by signal/ switch.
• Inductive DC Motor drive application.

Technical Specifications

• L x W x H (mm): 220 x 160 x 65.

Input

• Input Voltage : 90V AC To 135V AC or 150V AC TO 300V AC(Single Phase).
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 40A @ 240V Fuse AC 1/2 Cycle.
• Hold Up Time : 20 m Sec @ 150VAC input.
• Efficiency : 70-85%.

Output

• Voltage: 0 -6V, 0 -12V, 0 -18V,0-24V, 0-48V, 0- 86V (Max.) Adjustable or Fixed.
• Current: 0.5A TO 15A Adjustable or Fixed
• Output Power : 250W Max.
• Regulation : ± 0.5% Line and Load.
• Ripple : 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : LED For O/P ON, Forward direction & Reverse direction.

Termination

• 3 PIN/5.08mm MKDS for I/P & 2 PIN/5.08mm MKDS for O/P & 3Pin MKDS 5.08 For Push Switch (Screw Connector).

Cooling

• Natural Cooling.

Isolation

• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KV AC for one minute.

Warranty

• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.<.b>

We are engaged in offering AC to DC and DC to DC converter with single or multi output. Our range of AC to DC and DC to DC converter with single or multi output are available with following specification:

Model No:- MPE803

Features

• Proven Technology FLYBACK-PWM Control.
• Very Compact Size/ Light Weight.
• Wild Input Range / highly efficient.
• Output Over Load, Over Voltage & Short circuit Protection/li>
• Open PCB Plate Mounted With 5.08mm MKDS Connector for I/P & O/P Connection.
• You Can Get Many Outputs on this provision With Adding PCB.
• You Can Get high voltage regulated output on this provision With Adding PCB.
• All Isolated Output Provision Possible.

Technical Specifications

• L x H x W (mm) : 135 x 70 x 170 mm. ( For Two Number PCB by adding PCB length will be change)

Input

• Input Voltage : 9V-18V or 18V-36V or 36V- 63V or 63-90V or 90V- 270V DC or 90V AC TO 270V AC/DC.
• Frequency : 47 TO 63 HZ or (Up-to 400 HZ)*.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 16A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/ EMI Filter Provided.
• Hold up Time : 20 m Sec @90VAC input.
• Efficiency : 75-85%.

Output ( This is for one PCB’s Output By Adding PCB You Can get Many Outputs).

• Voltage O/P. No.1 : +5V,9V,12V,18V ,24V,48V( Max.)Fixed.
• Current O/P. No. 1 : 0.5A TO 5.0A ( Max.) Fixed.
• Regulation O/P No. 1 : +/- 0.5% Line/ Load.
• Voltage O/P. No.2 : +5V,9V,12V,18V ,24V( Max.)Fixed.
• Current O/P. No. 2 : 0.5A TO 1.0A (Max.) Fixed.
• Regulation O/P No. 2 : +/- 1% Line/ Load.
• Voltage O/P. No.3 : + 5V,9V,12V,18V ,24V( Max.)Fixed.
• Current O/P. No. 3 : 0.1A TO 0.5A ( Max.) Fixed.
• Regulation O/P No. 3 : +/- 1% Line/ Load.(This output for one PCB By Adding PCB’S You Can get Many Outputs).
• Ripple : 1% PK-PK.
• Protection : O/P over Voltage, Over load & Short Circuit For 1st Output & over load & Short circuit for 2nd & 3rd Output.

Termination

• 3 PIN/5.08mm MKDS for I/P & 5PIN/5.08mm MKDS for O/P (Screw Connector ).

Cooling

• Natural.

Isolation

• I/P TO O/P : 2 KVAC for One minute.
• I/P TO Earth : 1.5 KVAC for one minute.

Warranty

• 12 Month from date of purchase.
  
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.

We are engaged in offering 600W power supply system. Our range of 600W power supply system are available with following specification:

Model No:- MPE804

Featuers

• According to your Specification & Requirement Up-to 600W.
• Proven Technology half Bridge ,Push Pull, Fly-back, PWM Control.
• Very Compact Size/ Light Weight.
• Wide Input Range / highly efficient.
• Output over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment 0 to Max. Available.
• CVCC/ FCBC Characteristic for High Current Battery Charging Application.
• Specific type of enclosures & Meter.
• Programmable SMPS output Voltage can be programmed by external control voltage (0-5V or 0V to 10V Ref.)*.
• TTL Switch.*
• Direct series connection.
• By Using External Diode Block (N+1) Redundancy Possible.

Technical Specification

• L x W x H (mm): 280 x 210 x 95 mm.(for open PCB + Plate Mounted) Or
  
• L x D x H (mm): 380 x 340 x 140 (BOX).

Input

• Input Voltage : 9V-18V or 18V-36V or 36V- 63V or 63V-90V or 90V- 270V DC or 90V AC To 135V AC or 150V AC TO 300V AC (Single Phase). Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 60A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold Up Time : 20 m Sec @ Minimum Voltage input.
• Efficiency : 75-85%.

Output

• Voltage: As required 0 TO 130V Max. (Adj.) or Fixed.
• Current: 0.5A TO 100A (Max.) Fixed or Adj.
• Regulation : ± 0.5% Line and Load.
• Ripple : 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : Output ON indication (for open module), 2 Nos. Digital Panel Meter for O/P Voltage & Current Measurement (For Box Mounting).

Termination

• Screw Type or Nut-Bolt (For High Current).

COOLING

• In Box Fan Cooling Provided, For open module fan cooling required.

Isolation

• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KVAC for one minute.

Warranty

• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.

We are engaged in offering AC To DC power converter with 250W SMPS base. Our range of AC To DC power converter with 250W SMPS base are available with following specification:

Model No.:- MPE805
Featuers

• Proven Technology Half Bridge CVCC-PWM Control.
• Very compact size and light weight.
• Wide input range and highly efficient.
• Output over load, over voltage & short circuit protection.
• CVCC characteristic battery charging, halogen lamp and inductive load application.
• Programmable output current Limit.
• 3U Panel Mountable specific type of enclosures.
• Power Fail signal Provide.
  
• Direct series connection.
• Inbuilt Diode Block Direct (N+1) Redundancy Possible.

Technical Specification

• L x W x H (mm): 220 x 100 x 50 (box).

Input

• Input Voltage : 150VAC TO 300V AC or 90V AC To 135V AC.
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 40A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold Up Time : 20 m Sec @ 150VAC input or 20 m Sec @ 90VAC input.
• Efficiency : 75-85%.

Output

• Voltage: As Required 86V (Max.) or 6V, 12V, 18V, 24V, 48V, 72V Battery Charging Fixed.
• Current: 0.5A TO 15A (Max.) Fixed.
• Regulation : ± 0.5% Line and Load.
• Ripple : 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : LED for Output ON, Input ON.

Termination

• 3 PIN/5.08mm MKDS for I/P & 8 PIN/5.08mm MKDS for O/P (Screw Connector).

Cooling

• Natural Cooling

Isolation

• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KV AC for one minute.

Warranty

• 12 Month From Date of Purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.