|
|
|
POWER SUPPLY ACCORDING TO CLIENT SPECIFICATION
We are offering flawless power supply as per clients' specifications and requirement. The power supply is offered upto 1100W & 1600W and 250W SMPS. Demanding minimum maintenance, our products are widely demanded. Offered at industry leading prices, our products are large in demand.
|
1100W & 1600W Power Supply Accourding To Your Requirment
| Model No.:- MPE801
FEATUERS
• According to your Specification & Requirement Up-to 1600W.
• Proven Technology half Bridge ,Push Pull, Fly-back, PWM Control.
• Very Compact Size/ Light Weight.
• Wide Input Range / highly efficient.
• Output over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment 0 to Max. Available.
• CVCC/ FCBC Characteristic for High Current Battery Charging Application.
• Specific type of enclosures & Meter.
• Programmable SMPS output Voltage can be programmed by external control voltage (0-5V or 0V to 10V Ref.)*.
• TTL Switch.*
• Direct series connection.
• By Using External Diode Block (N+1) Redundancy Possible.
TECHNICAL SPECIFICATION
MECHANICAL
• L x D x H (mm)
: 380 x 340 x 280 (Box for 1100W).
: Unit Weight : 17.00 Kg.
: 380 x 340 x 420 (Box for 1600W).
: Unit Weight : 26.00 Kg.
INPUT
• Input Voltage : 9V-18V or 18V-36V or 36V- 63V or 63V-90V or 90V- 135V DC or 90V AC To 135V AC or 150V AC TO 300V AC(Single Phase)
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 60A @ 240V Fuse AC 1/2 Cycle.
• Hold Up Time : 20 m Sec @ Minimum Voltage input
• Efficiency : > 75-85%.
OUTPUT
• Voltage: As required 0 TO 260V Max. (Adj.) or Fixed. (For 1100W) or Two number output (550W.) each
• Voltage: As required 0 TO 390V Max. (Adj.) or Fixed. (For 1600W) or Three number output (550W.) each
• Current: 0.5A TO 100A (Max.) Fixed or Adj.
• Regulation : ± 0.5% Line and Load.
• Ripple : < 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : 2 Nos. Digital Panel Meter for O/P Voltage & Current Measurement.
TERMINATION
• Screw Type or Nut-Bolt (For High Current).
COOLING
• In Box Fan Cooling Provided.
ISOLATION
• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KVAC for one minute.
WARRANTY
• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.
Add to Enquiry Basket |
250W SMPS Based Forward Reverse DC Motor Driver Or Power Supply
Model no.:- MPE802
FEATUERS
• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
• Wide Input Range / Highly efficient.
• Output over Load, Over Voltage & Short circuit Protection.
• Programmable output current limit.
• CVCC Characteristic DC Motor Application.
• Open PCB With Screw mounting Facility
• Voltage Adjustment 0 to Max. Available.
• You Can Change Output Voltage Polarity By Signal/Switch.
• Drive direction Forward-reverse change by signal/ switch.
• Inductive DC Motor drive application.
TECHNICAL SPECIFICATIONS
MECHANICAL
• L x W x H (mm): 220 x 160 x 65.
INPUT
• Input Voltage : 90V AC To 135V AC or 150V AC TO 300V AC(Single Phase).
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 40A @ 240V Fuse AC 1/2 Cycle.
• Hold Up Time : 20 m Sec @ 150VAC input.
• Efficiency : > 70-85%.
OUTPUT
• Voltage: 0 -6V, 0 -12V, 0 -18V,0-24V, 0-48V, 0- 86V (Max.) Adjustable or Fixed.
• Current: 0.5A TO 15A Adjustable or Fixed
• Output Power : 250W Max.
• Regulation : ± 0.5% Line and Load.
• Ripple : < 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : LED For O/P ON, Forward direction & Reverse direction.
TERMINATION
• 3 PIN/5.08mm MKDS for I/P & 2 PIN/5.08mm MKDS for O/P & 3Pin MKDS 5.08 For Push Switch (Screw Connector).
COOLING
• Natural Cooling .
ISOLATION
• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KV AC for one minute.
WARRANTY
• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.<.b>
Add to Enquiry Basket | 
|
According to Client Specification AC to DC or DC to DC Converter Sing;e or Multi Output
| Model No:- MPE803
FEATURES
• Proven Technology FLYBACK-PWM Control.
• Very Compact Size/ Light Weight.
• Wild Input Range / highly efficient. • Output Over Load, Over Voltage & Short circuit Protection
• Open PCB Plate Mounted With 5.08mm MKDS Connector for I/P & O/P Connection.
• You Can Get Many Outputs on this provision With Adding PCB.
• You Can Get high voltage regulated output on this provision With Adding PCB.
• All Isolated Output Provision Possible.
TECHNICAL SPECIFICATIONS
MECHANICAL
• L x H x W (mm) : 135 x 70 x 170 mm. ( For Two Number PCB by adding PCB length will be change)
INPUT
• Input Voltage : 9V-18V or 18V-36V or 36V- 63V or 63-90V or 90V- 270V DC or 90V AC TO 270V AC/DC.
• Frequency : 47 TO 63 HZ or (Up-to 400 HZ)*.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 16A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/ EMI Filter Provided.
• Hold up Time : 20 m Sec @90VAC input.
• Efficiency : > 75-85%.
OUTPUT ( This is for one PCB’s Output By Adding PCB You Can get Many Outputs).
• Voltage O/P. No.1 : +5V,9V,12V,18V ,24V,48V( Max.)Fixed.
• Current O/P. No. 1 : 0.5A TO 5.0A ( Max.) Fixed.
• Regulation O/P No. 1 : +/- 0.5% Line/ Load.
• Voltage O/P. No.2 : +5V,9V,12V,18V ,24V( Max.)Fixed.
• Current O/P. No. 2 : 0.5A TO 1.0A (Max.) Fixed.
• Regulation O/P No. 2 : +/- 1% Line/ Load.
• Voltage O/P. No.3 : + 5V,9V,12V,18V ,24V( Max.)Fixed.
• Current O/P. No. 3 : 0.1A TO 0.5A ( Max.) Fixed.
• Regulation O/P No. 3 : +/- 1% Line/ Load.
(This output for one PCB By Adding PCB’S You Can get Many Outputs).
• Ripple : < 1% PK-PK.
• Protection : O/P over Voltage, Over load & Short Circuit For 1st Output
& over load & Short circuit for 2nd & 3rd Output.
TERMINATION
• 3 PIN/5.08mm MKDS for I/P & 5PIN/5.08mm MKDS for O/P (Screw Connector ).
COOLING
• Natural.
ISOLATION
• I/P TO O/P : 2 KVAC for One minute.
• I/P TO Earth : 1.5 KVAC for one minute.
WARRANTY
• 12 Month from date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.
Add to Enquiry Basket |
600W Power Supply According to Your Requirment
Model No:- MPE804
FEATUERS
• According to your Specification & Requirement Up-to 600W.
• Proven Technology half Bridge ,Push Pull, Fly-back, PWM Control.
• Very Compact Size/ Light Weight.
• Wide Input Range / highly efficient. • Output over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment 0 to Max. Available.
• CVCC/ FCBC Characteristic for High Current Battery Charging Application.
• Specific type of enclosures & Meter.
• Programmable SMPS output Voltage can be programmed by external control voltage (0-5V or 0V to 10V Ref.)*.
• TTL Switch.*
• Direct series connection.
• By Using External Diode Block (N+1) Redundancy Possible.
TECHNICAL SPECIFICATION
MECHANICAL
• L x W x H (mm): 280 x 210 x 95 mm.(for open PCB + Plate Mounted) Or
• L x D x H (mm): 380 x 340 x 140 (BOX).
INPUT
• Input Voltage : 9V-18V or 18V-36V or 36V- 63V or 63V-90V or 90V- 270V DC or 90V AC To 135V AC or 150V AC TO 300V AC (Single Phase). Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 60A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold Up Time : 20 m Sec @ Minimum Voltage input.
•Efficiency : > 75-85%.
OUTPUT
• Voltage: As required 0 TO 130V Max. (Adj.) or Fixed.
• Current: 0.5A TO 100A (Max.) Fixed or Adj.
• Regulation : ± 0.5% Line and Load.
• Ripple : < 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : Output ON indication (for open module), 2 Nos. Digital Panel Meter for O/P Voltage & Current Measurement (For Box Mounting).
TERMINATION
• Screw Type or Nut-Bolt (For High Current).
COOLING
• In Box Fan Cooling Provided, For open module fan cooling required.
ISOLATION
• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KVAC for one minute.
WARRANTY
• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.
Add to Enquiry Basket | 
|
SMPS Based 250W AC To DC Converter With Additional Feature
| Model No.:- MPE805
FEATUERS
•Proven Technology Half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
• Wide Input Range / highly efficient.
• Output over Load, Over Voltage & Short circuit Protection.
• CVCC Characteristic Battery Charging , Halogen Lamp/ Inductive Load Application.
• Programmable output current Limit.
• 3U Panel Mountable specific type of enclosures.
• Power Fail signal Provide.
• Direct series connection.
• Inbuilt Diode Block Direct (N+1) Redundancy Possible.
TECHNICAL SPECIFICATION
MECHANICAL
• L x W x H (mm): 220 x 100 x 50 (box).
INPUT
• Input Voltage : 150VAC TO 300V AC or 90V AC To 135V AC.
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 40A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold Up Time : 20 m Sec @ 150VAC input or 20 m Sec @ 90VAC input.
• Efficiency : > 75-85%.
OUTPUT
• Voltage: As Required 86V (Max.) or 6V, 12V, 18V, 24V, 48V, 72V Battery Charging Fixed.
• Current: 0.5A TO 15A (Max.) Fixed.
• Regulation : ± 0.5% Line and Load.
• Ripple : < 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : LED for Output ON, Input ON.
TERMINATION
• 3 PIN/5.08mm MKDS for I/P & 8 PIN/5.08mm MKDS for O/P (Screw Connector).
COOLING
• Natural Cooling
ISOLATION
• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KV AC for one minute.
WARRANTY
• 12 Month From Date of Purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.
Add to Enquiry Basket |
|
|
