We are engaged in offering float battery charger (550W SMPS Base). Our range of float battery charger (550W SMPS Base) are available with following specification:

Model No.:- MPE201

Featuers

• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
  
• Wide Input Range and highly efficient.
• Output over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment For Float & Boost Mode Available.
• FCBC Characteristic for High current Battery Charging Application.
• Open PCB, or (With Request specific type of enclosures & Meter.)*.
  
• TTL Switch.

Technical Specification

• L x W x H (mm): 280 x 210 x 95 (Open PCB Plate+ Heat-Sink Mounted).
• L x D x H (mm) : 380 x 340 x 140 (BOX).
• Unit Weight : 9.00 Kg.

Input

• Input Voltage : 150V AC TO 300V AC(Single Phase).
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 60A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold Up Time : 20 m Sec @150VAC input
• Efficiency : 75-85%.

Output

• Voltage: 0 TO 130V (Adj. Max.) or 6V, 12V, 18V, 24V, 48V, 72V, 110V Battery Charging Fixed. or Float and Boost Manually Adjustable.
• Current: 0.5A TO 100A (Max.) Fixed or Adj.
• Auto Change over : When Exciding Selected Float Currant.
• Regulation : ± 0.5% Line and Load.
• Ripple : 1% PK-PK.
• Protection : O/P Over Voltage Over load & Short Circuit.
• Indication : LED for O/P ON, Float ON, Boost ON( For Open PCB).
• Indication : LED For Float & Boost Mode & 2 Nos. Digital Panel Meter For O/P Voltage & Current Measurement.

Termination

• Screw Type or Nut-Bolt (For High Current Application).

Cooling

• Fan Cooling Required For Open PCB or Fan Cooling Provided inside Box.

Isolation

I/P TO O/P : 2 KV AC for One minute.

I/P TO Earth : 1.5 KV AC for one minute.

Warranty

• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also

We are engaged in manufacturing and exporting of 1600 W SMPS based high current FCBC battery charger. Our 1600 W SMPS based high current FCBC battery charger are available with following specification:

Modle NO.:- MPE202

Featuers

• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
  
• Wide Input Range / highly efficient.
• Output over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment For Float & Boost Mode Available.
• FCBC Characteristic for High current Battery Charging Application.
• Specific Type of Enclosures & Meter.
• TTL Switch.

Technical Specification

• L x D x H (mm): 380 x 340 x 280 (Box for 1000W Output).
• Unit Weight : 17.00 Kg.
  : 380 x 340 x 420 (Box for 1600W Output).
• Unit Weight : 26.00 Kg.

Input

• Input Voltage : 150V TO 300V AC(Single Phase).
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 60A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold Up Time : 20 m Sec @150VAC input
• Efficiency : 75-85%.

Output

• Voltage: 0 TO 390V (Adj. Max.) or 6V, 12V, 18V, 24V, 48V, 72V, 110V Battery Charging Fixed. or Float /Boost Manually Adjustable.
• Current: 0.5A TO 100A (Max.) Fixed or Adj.
• Auto Change over : When Exciding Selected Float Currant.
• Regulation : ± 0.5% Line and Load.
• Ripple : 1% PK-PK.
• Protection : O/P Over Voltage Over load & Short Circuit.
• Indication : LED For Float & Boost Mode & 2 Nos. Digital Panel Meter O/P Voltage & Current Measurement.

Termination

• Screw Type or Nut-Bolt (For High Current Application).

Cooling

Fan Cooling Provided inside Box.

Isolation

• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KVAC for one minute.

Warranty

• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.