We are engaged in offering CVCC battery charger with 50W SMPS base. These CVCC battery charger with 50W SMPS base are available with following specification:

Model No.:-MPE101

Features

• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
• Wild Input Range / highly efficient.
• Output Over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment 0 to Max. Available.
• CVCC Characteristic for Battery Charging application.
• Open PCB or(specific type of enclosures)*.

Technical Specifications

• L x W x H (mm) : 123 x 85 x 35 or 123 x 85 x 50 mm.

Input

• Input Voltage: 150V AC To 300V AC or 90V AC To 135V AC(Single Phase).
• Frequency: 47 TO 63 HZ.
• Input Protection: Internal AC Fuse + Soft Start.
• Inrush Protection: 24A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance: Inbuilt RFI/ EMI Filter Provided.
• Hold up Time: 20 m Sec @150VAC input or 20 m Sec @ 90VAC input.
• Efficiency: 75-85%.

Output

• VOLTAGE: 0V TO 48V (Adj. Max.) OR 6V, 12V, 18V, 24V, 48V Battery Charger Fixed.
• CURRENT: 0.5A TO 5A Max. (As Required) Fixed (constant current or fold back Type.)
• Regulation: ± 0.5% Line and Load.
• Ripple: 1% PK-PK.
• Protection: O/P over Voltage, over load & Short Circuit.
  
• Indication: LED for O/P ON.

Termination

• 3 PIN/5.08mm MKDS for I/P & 2 PIN/5.08mm MKDS for O/P ( Screw Connector ).

Cooling

• Natural.?

Isolation

• I/P TO O/P: 2 KV AC for One minute.
• I/P TO Earth: 1.5 KV AC for one minute.

Warrenty

• 12Month from date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also

Leading in offering CVCC battery charger with 250W SMPS base. Our range of CVCC battery charger with 250W SMPS base are available with following specification

Model No:- MPE102

Features

• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
• Wide Input Range / Highly efficient
• Output over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment 0 to Max. Available.
• CVCC Characteristic for Battery Charging.
• Open PCB or (With specific type of enclosures with mounting provision).
• Halogen Lamp & inductive load application.
• Direct series connection.
• By Using External Diode Block (N+1) Redundancy Possible.

Technical Specification

• L x W x H (mm) : 160 x 100 x 60 (For 50W TO 150W) : 190 x105 x60 (for 150W TO 250W).
• Unit Weigght : 1.00 Kg.

• L x D x H (mm) : 125 x 202 x 95 (Enclosure Size with Fan).
  
• Enclosure Weigght : 1.90 Kg.

Input

• Input Voltage : 150VAC TO 300V AC or 90V AC To 135V AC(Single Phase).
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 40A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold up Time : 20 M Sec @150VAC input or 20 M Sec @ 90VAC input.
• Efficiency :75-85%.

Output

• Voltage: 0 TO 86V (Adj. Max.) or 6V, 12V, 18V, 24V, 48V, 72V Battery Charging Fixed.
• Current: 0.5A TO 15A Max. (As Required) Fixed (constant current or fold back Type.)
• Regulation : ± 0.5% Line and Load.
  
• Ripple : 1% PK-PK.
• Protection : O/P over Voltage, over load & Short Circuit.
• Indication : LED for O/P ON.

Termination

• 3 PIN/5.08mm MKDS for I/P & 6 PIN/5.08mm MKDS for O/P (Screw Connector).

Cooling

• For 50W To 150W – Natural Cooling.
• For 150W To 250W- Fan Cooling Required.

Isolation

• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KV AC for one minute.

Warrenty

• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.

We offer CVCC battery charger (550W SMPS base). Our range of CVCC battery charger (550W SMPS base) are available with following specification:

Model No:- MPE103

Featuers

• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size and Light Weight.
• Wide Input Range and highly efficient.
• Output over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment 0 to Max. Available.
• CVCC Characteristic for High current Battery Charging Application.
• Open PCB or (With Request specific type of enclosures & Meter.).
• Programmable SMPS output Voltage can be programmed by external control voltage (0-5V or 0V- 10V Ref.).
• TTL switch.
• Direct series connection.
• By Using External Diode Block (N+1) Redundancy Possible.

Technical Specification

• L X W X H (mm): 280 x 210 x 95 (Open PCB Plate+ Heat-sink Mounted) : Or L x D x H (mm): 380 x 340 x 140 (BOX).

Input

• Input Voltage : 150V AC TO 300V AC or 90V To 135V AC (Single Phase).
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 60A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold Up Time : 20 m Sec @150VAC input or 20 m Sec @ 90V AC input.
• Efficiency : 75-85%.

Output

Voltage: 0 TO 130V Max.(Adj.) or 6V, 12V, 18V, 24V, 48V, 72V, 110V Battery Charging Fixed.

Current: 0.5A TO 100A(Max.) Fixed or Adj.

Regulation : ± 0.5% Line and Load.

Ripple : 1% PK-PK.

Protection : O/P over Voltage Over load & Short Circuit.

Indication : LED for O/P ON( For open PCB). : 2 Nos. Digital Panel Meter for O/P Voltage & Current Measurement ( For Box Mounting).

Termination

• Screw Type or Nut-Bolt ( For High Current).

Cooling

Fan Cooling Required For Open PCB, In Box Fan Cooling Provided.

Isolation

I/P TO O/P : 2 KV AC for One minute.

I/P TO Earth : 1.5 KVAC for one minute.

Warranty

12 Month From date of purchase.

Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.

We offer CVCC battery charger (1600W SMPS base). Our range of CVCC battery charger (1600W SMPS base) are available with following specification:

Model No:- MPE104

Featuers

• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
• Wide Input Range / highly efficient.
• Output over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment 0 to Max. Available.
• CVCC Characteristic for High current Battery Charging Application.
• Specific Type Of Enclosures & Meter.
• Programmable SMPS output Voltage can be programmed by external control voltage (0-5V or 0-10V Ref.)
• TTL switch.

Technical Specification

• L x D x H (mm) : 380 x 340 x 280 (Box for 1100W Output). : 380 x 340 x 420 (Box for 1600W Output).

Input

• Input Voltage : 150V AC TO 300V AC(Single Phase).
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 60A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold Up Time : 20 m Sec @150VAC input.
• Efficiency : 75-85%.

Output

• Voltage: 0 TO 390V DC Max.(Adj.) or 6V, 12V, 18V, 24V, 48V, 72V, 110V,220V Battery Charging Fixed.
• Current: 0.5A TO 100A (Max.) Fixed or Adj.
• Regulation : ± 0.5% Line and Load.
• Ripple : 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : 2 Nos. Digital Panel Meter For Output Voltage & Current Measurement.

Termination

• Screw Type or Nut-Bolt ( For High Current).

Cooling

• In Box Fan Cooling Provided.

IsolationI/P TO O/P : 2 KV AC for One minute.

I/P TO Earth : 1.5 KVAC for one minute.

Warranty

• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also