We bring to our clients AC-DC Power Supply systems with 1000W to 12000W SMPS base, that cater to the requirements of various industries. These power supply systems are used instead of battery plant or battery plant charger. Our range is incorporated with CVCC characteristics for battery charging, power supply and inductive load application. Highly efficient and reliable, these are offered in a wide range of inputs.

Model No.MPE301

Features

• POWER SUPPLY APPPLICATION USED INSTEAD OF BATTERY PLANT OR BATTERY PLA NT CHARGER.
• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
• Wide Input Range / Highly efficient
• Output over Load, Over Voltage & Short circuit Protection.
• Programmable Output Voltage & current.
• CVCC Characteristic for Battery Charging, power supply and inductive load application.
• Specific type of enclosures with DPM.
• MCB for input protection and ON/OFF purpose’s
• Internal battery blocking diode provided.
• Inbuilt blocking diode provided.
• Direct series connection. Or (N+1) Redundancy Possible.
• Programmable SMPS output Voltage can be programmed by external control voltage (0-5V or 0V- 10V Ref.)*.
• Remote Control on- off.*
• All double rated component used in product for reliability and long life.

Special Features:

• Soft start on DC side.
• Class-F insulation for all magnetic.
• Automatic voltage regulation using digital control logic.
• Filter circuit to limit ripple.
• Charger current limiting

Technical Specification
Mechanical

• L x D x H (mm) : 660 x 500 x 405 (BOX for 1200W to 4000 W single phase model)./660 x 500 x 1215 (BOX for 4000W to 12000 W Three phase model).

Input

• Input Voltage : 150V AC TO 300V AC . (single phase) for upto 4000W/440V (4 wire system) (Three phase)for 4000W to 120000W.
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 60A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold Up Time : 20 m Sec @150VAC input or 20 m Sec.
• Efficiency : > 75-85%.

Output

• Voltage : 0 to440V DC Max.(Adj.) or 6V, 12V, 18V, 24V, 48V, 72V, 110V,220V ,440V DC us required
• Current : 0.5A TO 200A (Max.) Fixed or Adj. us required. .
• Regulation : ± 0.5% Line and Load.
• Ripple : < 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : 2 Nos. Digital Panel Meter For Output Voltage & Current Measurement.

Termination

• For Input : 3way 30 A or 60A (screw connector)
• For Output : 4 way 60A screw connector or nut –bolt for high current O/P.

Cooling

• In Box Fan Cooling Provided.

Isolation

• I/P TO O/P : 2 KV AC for One minute.
• O/P TO Earth : 1.5 KVAC for one minute.

Warranty

• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.

The DC-DC Power Supply systems with 600W TO 4000W SMPS base offered by us are used in battery step (up/down) for plant or DC to battery plant charger. Our range is equipped with programmable output voltage, current facility and CVCC characteristics for power supply, battery charger and inductive load application. Made using top grade components these are known for reliability and long life.

 

Model No.MPE302

Features

• POWER SUPPLY APPPLICATION USED BATTERY STEP (UP/DOWN) FOR PLANT OR DC TO BATTERY PLANT CHARGER.
• Proven Technology push pull/fly-back CVCC-PWM Control.
• Very Compact Size/ Light Weight.
• Wide Input Range / Highly efficient
• Output over Load, Over Voltage & Short circuit Protection.
• Programmable output voltage and current.
• CVCC Characteristic for power supply, battery charger and inductive load application.
• Specific type of enclosures with DPM .
• TTL switch for Output ON/OFF purpose.
• Direct series connection. Inbuilt diode block (N+1) Redundancy Possible.
• Programmable SMPS output Voltage can be programmed by external control voltage (0-5V or 0V- 10V Ref.)*.
• All double rated component used in product for reliability and long life.

Special Features:

• Soft start on DC side.
• Class-F insulation for all magnetic.
• Automatic voltage regulation using digital control logic.
• Filter circuit to limit ripple.
• Charger current limiting

Technical Specification
Mechanical

• L x D x H (mm) : 330 x 320 x 280 ( Model for 600W to 1200W) approx./660 x 500 x 405 (Model for 1200W to 4000 W).approx.

Input

• Input Voltage : 9V-18V or 18V-36V or 36V- 63V or 63V-90V or 90V- 270V DC.(any one)
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 16A @ 240V Fuse AC 1/2 Cycle.
• Hold up Time : 20 m Sec @ Minimum DC input.
• Efficiency : > 75-85%.

Output

• Voltage : 0 TO 440V DC Max.(Adj.) or fix voltage us required .
• Current : 0.5A TO 100A (Max.) Fixed or Adj. us required.(CVCC type)
• O/P Power : 600W to 4000W Max.
• Regulation : ± 0.5% Line and Load.
• Ripple : < 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.

Indication

• With enclosure with DPM : 2 Nos. high quality Digital Panel Meter for O/P Voltage & Current Measurement

Termination

• 3 ways 60 A connector for Input & 4Way 60A connector for Output

Cooling

• In box 2 nos. 4 inch DC fan provided for cooling

Isolation

• I/P TO O/P : 2 KV AC for One minute.
• O/P TO F/G : 1.5 KVAC for one minute.

Warranty

• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After the Warranty Period Also

We are offering AC To DC converter with 60W SMPS base. Our range of AC To DC converter with 60W SMPS base are available with following specification:

Model No.:-MPE404

Features

• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
• Output Over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment 0 to Max. Available
• Adjustable output current Limit.
• CVCC Characteristic for Battery Charging/Relay/Halogen Lamp/Inductive Load Application.
• Open PCB With Corner Screw Mounting Facility.
• By Using External Diode Block (N+1) Redundancy Possible.

Technical Specifications

L x W x H (mm): 110 x 75 x 35 or 50 & 160 x 100 x 35 OR 50 (3U).

With Enclosure Size - L x D x H (mm): 105 x 135 x 65 mm.

Input

Input Voltage :90V AC TO 270V AC(Single Phase)OR DC.

Frequency : 47 TO 63 HZ or Up-to 400 HZ.

Input Protection : Internal AC Fuse + Soft Start.

Inrush Protection : 16A @ 240V Fuse AC 1/2 Cycle.

EMI Compliance : Inbuilt RFI/EMI Filter Provided.

Hold up Time : 20 m Sec @90VAC input.

Efficiency : 75-85%.

Output

• Voltage: 5V, 12V, 18V, 24V, 28V ( Max.)+/-1V (Adj.) or Fixed (As Required).
• Current: 0.5A TO 5A(Max.) Fixed (As Required).
• Regulation : ± 0.5% Line and Load.
• Ripple : 1% PK-PK.
• Protection : O/P over Voltage, over load & Short Circuit.
• Indication : LED for O/P ON.

Termination

• 3 PIN/5.08mm MKDS for I/P & 2 PIN/5.08mm MKDS for O/P (Screw Connector). (64 Pin U/ROW connector for 3U).

Cooling

• Natural.

Isolation

• I/P TO O/P : 2 kV AC for One minute.
• I/P TO Earth : 1.5 kV AC for one minute.

Warranty

• 12 Month from date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.

We are offering AC To DC converter with 550W SMPS base. Our range of AC To DC converter with 550W SMPS base are available with following specification:

Model No.:-MPE403

Features

• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
• Output Over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment 0 to Max. Available
• Adjustable output current Limit.
• CVCC Characteristic for Battery Charging/Relay/Halogen Lamp/Inductive Load Application.
• Open PCB With Corner Screw Mounting Facility.
• By Using External Diode Block (N+1) Redundancy Possible.

Technical Specification

• L X W X H (mm): 280 x 210 x 95 (Open PCB Plate+ Heat-sink Mounted) : Or L x D x H (mm): 380 x 340 x 140 (BOX).
• Unit Weight : 9.00 Kg.

Input

• Input Voltage : 150V AC TO 300V AC or 90V To 135V AC (Single Phase).
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 60A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold Up Time : 20 m Sec @150VAC input or 20 m Sec @ 90V AC input.
• Efficiency : 75-85%.

Output

• Voltage: As required 0V TO 130V Max. (Adj.) or Fixed.
• Current: 0.5A TO 100A (Max.) Fixed or Adj.
• Regulation : ± 0.5% Line and Load.
• Ripple : 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : LED for O/P ON (For Open PCB).
• Indication : 2 Nos. Digital Panel Meter for O/P Voltage & Current Measurement ( For Box Mounting).

Termination

• Screw Type or Nut-Bolt (For High Current).

Cooling

• Fan Cooling Required For Open PCB, In Box Fan Cooling Provided.

Isolation

• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KV AC for one minute.

Warranty

• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.

We are offering AC To DC converter with 1200W & 1800W SMPS base. Our range of AC To DC converter with 1200W & 1800W SMPS base are available with following specification:

Model No.:-MPE405

Features

• Proven Technology half Bridge CVCC-PWM Control.
• Very Compact Size/ Light Weight.
• Output Over Load, Over Voltage & Short circuit Protection.
• Output Voltage adjustment 0 to Max. Available
• Adjustable output current Limit.
• CVCC Characteristic for Battery Charging/Relay/Halogen Lamp/Inductive Load Application.
• Open PCB With Corner Screw Mounting Facility.
• By Using External Diode Block (N+1) Redundancy Possible.

Technical Specification

• L x D x H (mm): 380 x 340 x 280(BOX for 1200W).
• Unit Weight : 17.00 Kg.
• L x D x H (mm): 380 x 340 x 420(BOX for 1800W).
• Unit Weight : 26.00 Kg.

Input

• Input Voltage : 150V AC TO 300V AC or 90V To 135V AC (Single Phase).
• Frequency : 47 TO 63 HZ.
• Input Protection : Internal AC Fuse + Soft Start.
• Inrush Protection : 60A @ 240V Fuse AC 1/2 Cycle.
• EMI Compliance : Inbuilt RFI/EMI Filter Provided.
• Hold Up Time : 20 m Sec @150VAC input or 20 m Sec @ 90V AC input.
• Efficiency : 75-85%.

Output

• Voltage: As required 0V TO 260V Max. (Adj.) or Fixed for 1200W model.
• Voltage: As required 0V TO 390V Max. (Adj.) or Fixed for 1800W model.
• Current: 0.5A TO 100A (Max.) Fixed or Adj.(As Required).
• Regulation : ± 0.5% Line and Load.
• Ripple : 1% PK-PK.
• Protection : O/P over Voltage Over load & Short Circuit.
• Indication : 2 Nos. Digital Panel Meter for O/P Voltage & Current Measurement.

Termination

• Screw Type or Nut-Bolt (For High Current).

Cooling

• 4 numbers fan provided for cooling.(1200W)
• 6 numbers fan provided for cooling.(1800W)

Isolation

• I/P TO O/P : 2 KV AC for One minute.
• I/P TO Earth : 1.5 KV AC for one minute.

Warranty

• 12 Month From date of purchase.
• Our Service & Maintenance Facilities Will Be Available After The Warranty Period Also.